Filter
Top Products
5 - 15
ENG
CAMSHAFTS
2. Install:
• exhaust camshaft 1
• intake camshaft 2
(with the camshaft sprockets)
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Turn the crankshaft clockwise.
b. When piston #1 is at TDC on the compres-
sion stroke, align the “T” mark a on the
pickup coil rotor with the crankcase mating
surface b.
c. Install the timing chain onto both camshaft
sprockets, and then install the camshafts.
NOTE:
@
• Install the camshafts with the hole c in the
cylinder #4 - cam facing up.
• When installing the timing chain, start with
the exhaust camshaft and be sure to keep
the timing chain as tight as possible on the
exhaust side.
• Make sure the marks e on the timing chain
sprockets are parallel with the edge of the
cylinder head.
d : Intake side “—”
e : Exhaust side “→”
f : Cylinder #1 - cam
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
E
E
3. Install:
• dowel pins
• intake camshaft caps
• exhaust camshaft caps
NOTE:
@
• The “I” mark refers to the intake camshaft
caps and the “E” mark refers to the exhaust
camshaft cap.
• Install the camshaft caps with the arrow mark
a pointing towards the right side of the
engine.
• Make sure the punch marks b in the cam-
shaft are aligned with the arrow mark a on
the camshaft caps.