5 - 51
ENG
EAS00285
CHECKING THE CLUTCH BOSS
1. Check:
• clutch boss splines
Damage/pitting/wear
→
Replace the clutch
boss.
NOTE:
@
Pitting on the clutch boss splines will cause
erratic clutch operation.
EAS00286
CHECKING THE PRESSURE PLATE
1. Check:
• pressure plate
1
Cracks/damage
→
Replace.
• bearing
2
Damage/wear
→
Replace.
EAS00288
CHECKING THE CLUTCH PUSH RODS
1. Check:
• O-ring
1
• short clutch push rod
2
• long clutch push rod
3
• ball
4
Cracks/damage/wear
→
Replace the defec-
tive part(s).
2. Measure:
• long clutch push rod bending
Out of specification
→
Replace the long
clutch push rod.
Long clutch push rod bending
limit
0.37 mm
EAS00292
CHECKING THE PRIMARY DRIVEN GEAR
1. Check:
• primary driven gear
1
Damage/wear
→
Replace the clutch hous-
ing and crankshaft as a set.
Excessive noise during operation
→
Replace the clutch housing and crankshaft
as a set.
CLUTCH