Filter
Top Products
3 - 31
CHK
ADJ
ADJUSTING THE THROTTLE CABLE FREE PLAY
3. Adjust:
• throttle cable free play
NOTE:
@
When the throttle is opened, the accelerator
cable 1 is pulled.
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
Throttle body side
a. Loosen the locknut 2 on the decelerator
cable.
b. Turn the adjusting nut 3 in direction a or
b to take up any slack on the decelerator
cable.
c. Loosen the locknut 4 on the accelerator
cable.
d. Turn the adjusting nut 5 in direction a or
b until the specified throttle cable free play
is obtained.
e. Tighten the locknuts.
NOTE:
@
If the specified throttle cable free play cannot
be obtained on the throttle body side of the
cable, use the adjusting nut on the handlebar
side.
Handlebar side
a. Loosen the locknut 1.
b. Turn the adjusting nut 2 in direction a or
b until the specified throttle cable free play
is obtained.
c. Tighten the locknut.
Direction
a
Throttle cable free play
is increased.
Direction
b
Throttle cable free play
is decreased.
Direction
c
Throttle cable free play
is increased.
Direction
d
Throttle cable free play
is decreased.