Filter
Top Products
3 - 82
CHK
ADJ
REPLACING THE HEADLIGHT BULBS/
ADJUSTING THE HEADLIGHT BEAMS
5. Install:
• headlight bulb
Secure the new headlight bulb with the
headlight bulb holder.
CAUTION:
@
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb, and the luminous flux will be
adversely affected. If the headlight bulb
gets soiled, thoroughly clean it with a cloth
moistened with alcohol or lacquer thinner.
6. Attach:
• headlight bulb holder
7. Install:
• headlight bulb cover
8. Connect:
• headlight coupler
New
EAS00185
ADJUSTING THE HEADLIGHT BEAMS
The following procedure applies to both of the
headlights.
1. Adjust:
• headlight beam (vertically)
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Turn the adjusting screw 1 in direction a
or b.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
Direction
a
Headlight beam is
raised.
Direction
b
Headlight beam is low-
ered.