6 - 6
COOL
OIL COOLER
EAS00458
CHECKING THE OIL COOLER
1. Check:
• oil cooler
Cracks/damage
→
Replace.
2. Check:
• oil cooler inlet hose
• oil cooler outlet hose
Cracks/damage/wear
→
Replace.
EAS00459
INSTALLING THE OIL COOLER
1. Clean:
• mating surfaces of the oil cooler and the
crankcase
(with a cloth dampened with lacquer thin-
ner)
2. Install:
• O-ring
• oil cooler
NOTE:
@
Make sure the O-ring is positioned properly.
3. Fill:
• cooling system
(with the specified amount of the recom-
mended coolant)
Refer to “CHANGING THE COOLANT” in
chapter 3.
•crankcase
(with the specified amount of the recom-
mended engine oil)
Refer to “CHANGING THE ENGINE OIL” in
chapter 3.
New
T
R
.
.
12 Nm (1.2 m · kg)