5 - 3
ENG
ENGINE
Order Job/Part Q’ty Remarks
Left footrest bracket/dust cover Refer to “SHAFT DRIVE” in chapter 4.
1 Clutch release cylinder 1
2 Dowel pin 2
3 Sidestand switch coupler 1 Disconnect.
4 Crankcase breather hose 1
5 Starter motor lead 1 Disconnect.
6 Stator assembly coupler 1 Disconnect.
7 Oil level sensor connector 1 Disconnect.
8 Crankshaft position sensor coupler 1 Disconnect.
9 Neutral switch connector 1 Disconnect.
10 Speed sensor coupler 1 Disconnect.
11 Ground lead 1
For installation, reverse the removal
procedure.