4 - 17
CHAS
FRONT AND REAR BRAKES
5. Install:
• brake pad pins
• brake pad clips
• brake caliper
• brake hose holder
T
R
.
.
40 Nm (4.0 m · kg)
T
R
.
.
7 Nm (0.7 m · kg)
6. Check:
• brake fluid level
Below the minimum level mark a → Add
the recommended brake fluid to the proper
level.
Refer to “CHECKING THE BRAKE FLUID
LEVEL” in chapter 3.
7. Check:
• brake lever operation
Soft or spongy feeling → Bleed the brake
system.
Refer to “BLEEDING THE HYDRAULIC
BRAKE SYSTEM” in chapter 3.
EAS00583
REPLACING THE REAR BRAKE PADS
NOTE:
@
When replacing the brake pads, it is not neces-
sary to disconnect the brake hose or disas-
semble the brake caliper.
1. Remove:
• retaining bolts 1
• brake caliper 2
2. Remove:
• brake pads 1
(along with the brake pad shims)
• brake pad springs 2