Filter
Top Products
8 - 13
–+
ELEC
IGNITION SYSTEM
YES
NO
EAS00748
YES
NO
EAS00749
YES
NO
EAS00750
YES
NO
EAS00751
YES
NO
Tester negative probe
→
spark plug lead
1
Tester positive probe
→
spark plug lead
2
• Measure the secondary coil resistance.
Secondary coil resistance
12 ~ 18 k
Ω
at 20 °C
• Is the ignition coil OK?
Replace the ignition
coil.
7. Crankshaft position sensor resistance
• Disconnect the crankshaft position sensor
coupler from the wire harness.
• Connect the pocket tester (Ω × 100) to the
crankshaft position sensor coupler as
shown.
Tester positive probe
→
gray
1
Tester negative probe
→
black
2
• Measure the crankshaft position sensor
resistance.
Crankshaft position sensor resis-
tance
420 ~ 569
Ω
at 20 °C
(between gray and black)
• Is the crankshaft position sensor OK?
Replace the crank-
shaft position sensor.
8. Main switch
• Check the main switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the main switch OK?
Replace the main
switch.
9. Engine stop switch
• Check the engine stop switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the engine stop switch OK?
Replace the right
handlebar switch.
10.Neutral switch
• Check the neutral switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the neutral switch OK?
Replace the neutral
switch.