5 - 40
ENG
2. Install:
• stator assembly 1
• lead holder 2
T
R
.
.
10 Nm (1.0 m · kg)
LT
T
R
.
.
6 Nm (0.6 m · kg)
3. Install:
• woodruff key
• generator rotor
•washer
• generator rotor bolt
NOTE:
@
• Clean the tapered portion of the crankshaft
and the generator rotor hub.
• When installing the generator rotor, make
sure the woodruff key is properly seated in
the keyway of the crankshaft.
• Lubricate the generator rotor bolt and washer
with engine oil.
4. Tighten:
• generator rotor bolt 1
NOTE:
@
While holding the generator rotor 2 with the
sheave holder 3, tighten the generator rotor
bolt.
Sheave holder
90890-01701
T
R
.
.
130 Nm (13.0 m · kg)
GENERATOR AND STARTER CLUTCH