Filter
Top Products
4 - 90
CHAS
SWINGARM
2. Check:
• pivot shaft
Roll the pivot shaft on a flat surface.
Bends → Replace.
WARNING
@
Do not attempt to straighten a bent pivot
shaft.
3. Wash:
• pivot shaft
•spacers
• bushing
• bearings
Recommended cleaning solvent
Kerosene
4. Check:
•spacers
• bushing
•oil seals
Damage/wear → Replace.
• bearings
Damage/pitting → Replace.
EAS00712
INSTALLING THE SWINGARM
1. Lubricate:
• bearings
•spacers
•oil seals
• pivot shaft
Recommended lubricant
Lithium soap base grease
2. Install:
• bearing 1
(to the swingarm)
Installed depth
a
7.0 mm