5 - 32
ENG
VALVES AND VALVE SPRINGS
EAS00249
INSTALLING THE VALVES
The following procedure applies to all of the
valves and related components.
1. Deburr:
• valve stem end
(with an oil stone)
2. Lubricate:
• valve stem
1
•oil seal
2
(with the recommended lubricant)
Recommended lubricant
Molybdenum disulfide oil
3. Install:
•valve
1
• lower spring seat
2
•oil seal
3
• valve spring
4
• upper spring seat
5
(into the cylinder head)
NOTE:
@
• Make sure each valve is installed in its origi-
nal place.
• Install the valve spring with the larger pitch
a
facing up.
b
Smaller pitch