4 - 12
CHAS
REAR WHEEL AND BRAKE DISC
3. Measure:
• radial wheel runout
• lateral wheel runout
Refer to “FRONT WHEEL AND BRAKE
DISCS”.
EEAS00572
INSTALLING THE REAR WHEEL
1. Lubricate:
• wheel axle
• wheel bearings
• oil seal lips
Recommended lubricant
Lithium soap base grease
2. Tighten:
• brake torque rod nut
• wheel axle nut
• wheel axle pinch bolt
T
R
.
.
30 Nm (3.0 m · kg)
T
R
.
.
125 Nm (12.5 m · kg)
T
R
.
.
16 Nm (1.6 m · kg)
EAS00575
ADJUSTING THE REAR WHEEL STATIC
BALANCE
NOTE:
@
• After replacing the tire, wheel or both, the
rear wheel static balance should be adjusted.
• Adjust the rear wheel static balance with the
brake disc and rear wheel drive hub
installed.
1. Adjust:
• rear wheel static balance
Refer to “FRONT WHEEL AND BRAKE
DISCS”.