Filter
Top Products
8 - 42
–+
ELEC
SIGNALING SYSTEM
EAS00799
3. The turn signal light, turn signal indicator
light or both fail to blink.
YES
NO
YES
NO
YES
NO
1. Turn signal indicator light bulb and socket
• Check the turn signal light bulb and socket
for continuity.
• Are the turn signal light bulb and socket
OK?
Replace the turn sig-
nal light bulb, socket
or both.
2. Turn signal switch
• Check the turn signal switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the turn signal switch OK?
Replace the left han-
dlebar switch.
3. Voltage
• Connect the pocket tester (DC 20 V) to the
turn signal relay coupler as shown.
Tester positive probe
→
brown/green
1
Tester negative probe
→
ground
• Set the main switch to “ON”.
• Measure the voltage (12 V) on brown/green
1
at the turn signal relay coupler.
• Is the voltage within specification?
The wiring circuit
from the main switch
to the turn signal
relay coupler is faulty
and must be
repaired.
4. Voltage
• Connect the pocket tester (DC 20 V) to the
turn signal relay coupler as shown.
Tester positive probe
→
brown/white
1
Tester negative probe
→
ground
Br/W
Br/G
Br/W
Br/G