4 - 99
CHAS
SHAFT DRIVE
3. Install:
• stopper bolt shim(s) 1
• stopper bolt 2
• ring gear 3
• ring gear bearing housing
CAUTION:
@
• The stopper bolt has left-hand threads. To
tighten the stopper bolt, turn it counter-
clockwise.
• Apply LOCTITE
®
onto the stopper bolt.
@
4. Measure:
• ring-gear-to-stopper-bolt clearance
NOTE:
@
If the ring-gear-to-stopper-bolt clearance is out
of specification, repeat the above procedure.
@
T
R
.
.
9 Nm (0.9 m · kg)