Filter
Top Products
4 - 79
CHAS
STEERING HEAD
EAS00677
REMOVING THE LOWER BRACKET
1. Stand the motorcycle on a level surface.
WARNING
@
Securely support the motorcycle so that
there is no danger of it falling over.
2. Remove:
• lower ring nut
1
(with the special tool
2
)
WARNING
@
Securely support the lower bracket so that
there is no danger of it falling.
Steering nut wrench
90890-01403
EAS00681
CHECKING THE STEERING HEAD
1. Wash:
• bearings
• bearing races
Recommended cleaning solvent
Kerosene
2. Check:
• bearings
1
• bearing races
2
Damage/pitting
→
Replace.
3. Replace:
• bearings
• bearing races
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Remove the bearing races from the steering
head pipe with a long rod
1
and hammer.