Filter
Top Products
10.37
ELECTRICAL
10
4. Turn the headlight lamp socket counter-clockwise and
remove.
5. Carefully remove head lamp bulb from housing.
6. Remove the head lamp and replace with a new head lamp.
NOTE: Do not touch the lamp with bare fingers.
Hold the plastic part (1) of the lamp. Oil from your
skin leaves a residue, causing a hot spot that will
shorten the life of the lamp.
7. Install the new head lamp and harness assembly into the
headlight assembly. Turn the headlight harness clockwise
to secure the head lamp into place.
Headlight Housing Relacement
1. Remove three Phillips screws on the headlight pod.
2. Disconnect instrument cluster harness (A) and work light
switch (B).
3. Unplug head lamp harness (C).
4. Remove O-Ring (D) from headlight pivot pins. (Both
Sides)
5. Pull the headlight housing up to release from the locking
tabs.
6. Lift the adjusting knob up to remove from the locking tabs.
7. Carefully pull the assembly up and out of pod.
Turn Harness Assembly
Tighten
Loosen
A
B
C
D
l
Pull Upward