Filter
Top Products
7.2
FINAL DRIVE
SPECIFICATIONS
Torque Table
IMPORTANT: Verify which type of wheel ATV is
equipped with (aluminum or steel) when torquing
wheel nuts.
Special Tools
Gearcase Fluid / Capacity
FRONT DRIVE AXLE
Removal
1. Set the ATV in park. Remove hub dust cap.
2. Remove cotter pin.
3. Loosen the hub retaining nut.
4. Loosen - but do not remove - the wheel nuts.
5. Safely lift and support the front of the ATV.
6. Remove wheel.
7. Remove the two brake caliper attaching bolts.
C
OMPONENT
FT
.LBS.
(
IN.LBS.)
N
M
F/R Steel Wheel Nuts 30 41
F/R Aluminum Wheel Nuts 90 122
Front Hub Nut 70 95
Rear Hub Nut 80 109
Front Gearcase Mount Bolts 30 41
Standard Gearcase Screws 14 19
Lower Hub Carrier Bolts 50 68
Upper Hub Carrier Bolts 35 48
ADC Pump Screws (17-23) 1.9 - 2.5
ADC Cover Screws 7 - 11 9.4 - 14.9
ADC Bleed Valves (80) 9
P
ART NUMBER TOOL DESCRIPTION
2872608 Roller Pin Removal Tool
8700226 CV Boot Clamp Pliers
2870772 1 3/4” Straight Wrench
PA-48542
ADC Gearcase Piston
Installation Tool
GEARCASE DESCRIPTION
Centralized Hilliard
(Standard Models)
Demand Drive LT
Premium Hub Fluid
8.97 oz. (265 ml)
Centralized Hilliard
w/ ADC
(Deluxe Models)
Demand Drive LT
Premium Hub Fluid
9.3 oz. (275 ml)
ADC Gearcase
Pump Reservoir
Polaris ADC or AW ISO 10
Hydraulic Fluid
CAUTION
Serious injury could occur if machine tips or falls.
CAUTION
Do not hang the caliper by the brake line. Use wire
to hang the caliper to prevent possible damage to
the brake line.