Filter
Top Products
10.9
ELECTRICAL
10
ECM_MEM OUTPUT (constant power for ECM and Instrument Cluster)
MEM Circuit Limit 0.2 1.2 Amp Current capability of the output
REVERSE POLARITY PROTECTION
Battery Reverse Current 1.8 2 mA Max reverse leakage current when connected in reverse
Reverse Bias Voltage -55 Vdc
Absolute maximum reverse voltage
before device breakdown.
DIFFERENTIAL SOLENOID DRIVER (X2 ONLY)
Pull-in Current 9 A Max pull-in current when solenoid is energized
Hold Current 2 A Max holding current when solenoid is energized
TURF MODE Input 0 16 V Input voltage range
TURF MODE Input
Pull Down
5K Ohm Resistance to ground on input pin
Solenoid Speed Limit 15 MPH
Max SPEED input to prevent
differential solenoid engagement
STARTER LOCKOUT
STARTER Current 10 A Maximum load current
TRANS Park Limits 0.32 1.02 V Voltage range to enable STARTER output
TRANS Neutral Limits 1.83 2.53 V Voltage range to enable STARTER output
BRAKE Input 0 16 V Input voltage range
CHARACTERISTIC MIN TYP MAX UNIT NOTE