Filter
Top Products
3-8
Garmin G500 Pilot’s Guide
190-01102-02 Rev. B
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
3.3.6 Panning
The Panning Map Page function allows you to move the map beyond its
current limits without adjusting the map scale and to examine information at
the pointer location. When you select the panning function — by pressing the
small MFD knob — a target pointer flashes on the map display. A window also
appears at the top of the map display showing the latitude/longitude position of
the pointer, the ETE from your present position to the pointer, elevation at the
pointer, and bearing and distance to the pointer from your present position.
Information is related
to the tip of the pointer
Elevation at Pointer
ETE from present position
to tip of pointer
Lat/Lon at Pointer
Map Pointer Present Position
Figure 3-8 Navigation Map Pointer Location Information
1) While viewing a Map or Chart page, press the small MFD knob. A flashing
pointer will appear in the tip of the ownship symbol. The measured information
is referenced to the tip of the arrow.
Figure 3-9 Navigation Map Initial Pointer Location
2) Turn the large MFD knob to move the cursor horizontally. Turn the small MFD
knob to move the cursor vertically.
3)
Press the small MFD knob again to cancel panning. The display will return to
the previous map view.