Filter
Top Products
3-44
Garmin G500 Pilot’s Guide
190-01102-02 Rev. B
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
3.4.1.2 Airspeed Reference Marks
The Best Glide, Vr, Vx, and Vy airspeed reference marks for the PFD are
adjusted with this function. A marker will appear on the PFD Airspeed tape at
the selected speed when the value is set to “On.” Default reference airspeeds
are set during installation. When power is cycled, the values you set will be
retained.
Figure 3-67 Airspeed References shown on PFD when activated
1) While viewing the System Setup page of the AUX page group, press the small
MFD knob to activate the cursor. Turn the large MFD knob to highlight the
desired Airspeeds value.
2) Turn the small MFD knob to select the value and press ENT
.
3) The On/Off setting will now be highlighted.
Turn the small MFD knob to select
On or Off and press ENT
. The next value will be highlighted.