Filter
Top Products
2-24
Garmin G500 Pilot’s Guide
190-01102-02 Rev. B
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
2.8.2 Temperature Display
The Outside Air Temperature (OAT) is displayed to the left of the HSI. The
OAT can be displayed in ºF or ºC, which is configured in the Aux System Setup
Page. The temperature is derived from the Temperature Probe on the aircraft.
The displayed temperature is the Static Air Temperature reported by the Air Data
Computer. This temperature value is corrected for ram air heating effects.
Figure 2-35 HSI Outside Air Temperature
2.9 Wind Vectors
When selected, wind vector information is displayed in a window on the
PFD to the left of the HSI. The Wind Vector style is configured in the Aux Mode
System Setup page. While on the ground, the Wind Vector window will indicate
“No Wind Data.”
Figure 2-36 Wind Vector with No Wind Data
Four styles are available as shown below.
Style 1 Style 2 Style 3 Style 4
Figure 2-37 Wind Vector Style