Filter
Top Products
3-52
Garmin G500 Pilot’s Guide
190-01102-02 Rev. B
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
3.4.4 System Status
The System Status Page displays the statuses, serial numbers, and software
version numbers for all detected system LRUs. Pertinent information on all
system databases is also displayed. Active LRUs are indicated by green check
marks; failed LRUs by red “X’s.” Failed LRUs should be noted and a service
center or Garmin-authorized dealer informed.
LRU Info Window
Database Window
Scroll Bar
LRU Soft Key
Database Soft Key
Figure 3-79 LRU and Database Information
1) Turn the large MFD knob to the AUX page group.
2) Turn the small MFD knob to the System Status page.
3) Press the LRU soft key to highlight the first item in the LRU Info window.
4) Turn the small MFD knob to scroll through the items in the LRU Info window
in case more items are available than are displayed. If more items are available
than can be displayed in the window, a scroll bar will show on the right side of
the window.
5) Press the DBASE soft key to highlight the first item in the Database window.
6) Turn the small or large MFD knobs to scroll through the items in the Database
window in case more items are available than are displayed. If more items are
available than can be displayed in the window, a scroll bar will show on the
right side of the window.