Filter
Top Products
4-17190-01102-02 Rev. B
Garmin G500 Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
4.5.2 Altitude Display
Changing the altitude display mode
1) While viewing the Traffic page of the MAP page group, press the OPERATE
soft key to begin displaying traffic. “TAS OPERATING” is displayed in the Traffic
mode field.
2) Press the ALT MODE soft key to change the altitude volume. Select
the desired
altitude volume by pressing the
BELOW, NORMAL, ABOVE, or UNREST
(unrestricted) soft keys. The selection is displayed in the Altitude mode field.
Altitude Mode Displayed Traffic Range
Below -9700 ft to 2700 ft
Normal -2700 ft to 2700 ft
Above -2700 ft to 9700 ft
Unrestricted All Traffic Shown
Table 4-5 Displayed Traffic Range
3) Press the STANDBY soft key to place the system in the Standby mode.
OR
1) Press the MENU key.
2) Turn the small
MFD
knob
to select one of the following:
•BELOW
•NORMAL
•ABOVE
•UNREST(unrestricted)
3) Select the ENT key.