Filter
Top Products
3-42
Garmin G500 Pilot’s Guide
190-01102-02 Rev. B
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
3.4 Aux Mode Pages
The Aux mode provides pages for System Setup, XM Information (if installed),
and system Status.
3.4.1 System Settings
G500 system settings are managed from the Aux Mode System Setup Page.
The following settings can be changed:
•Display Brightness (Mode and Level)
•Airspeeds(Glide,V
R
, V
X
, and V
Y
)
•PFDOptions (Wind Vector)
•DualUnitSynchronization (CDI and Baro)
•Date/Time (Date, Time, Time Format, and Time Offset)
•MFDDisplay Units (Distance/Speed and Altitude/Vertical Speed)
•SystemDisplayUnits (Navigation Angle Reference, Pressure Units, and
Temperature Units)
Figure 3-63 Aux Mode System Setup Page
The default values set by the installer during installation are restored by using
the Page Menu options. The “Restore Unit Defaults” selection restores all default
settings. Pressing the DFLT UNIT soft key will also restore the Default Unit
settings. The “Restore Airspeed Defaults” selection restores only the Airspeed
Reference default settings.