Filter
Top Products
3-63190-01102-02 Rev. B
Garmin G500 Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
3.5.3.2 Selecting a New Chart by Airport
A chart for a different airport may be chosen by selecting the identifier for
the desired airport.
Figure 3-93 Airport Identifier Selection
1) While viewing the Charts page of the FPL page group, press the SELECT soft
key to change the airport.
2) Use the large MFD knob to move the cursor to highlight a character.
3) Use the small MFD knob to change the character.
4) Press ENT
to accept the selected airport.
5) Use the
large
and
small MFD
knobs to select the desired chart.
6) Press ENT
to display the desired chart.