Filter
Top Products
1-10
Garmin G500 Pilot’s Guide
190-01102-02 Rev. B
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
1.1.14.2 PFD Bezel Keys
Heading (HDG)
Selects Heading Select mode. Pressing the PFD knob in Heading mode will
center the Heading Bug on the current Heading. This is the default mode for
the PFD knob. If the Heading is invalid, the PFD knob will revert to Course
mode. Set the heading on the HSI by turning the PFD knob after pressing
the HDG key.
Course (CRS)
Selects Course Select mode. Pressing the PFD knob in Course mode will
center the CDI for a VOR or OBS mode course.
Altimeter (ALT)
Selects Altitude Select mode. Pressing the PFD knob in Altimeter mode will
enter the current altitude in the Altitude Select window. Set the Altitude Bug
by turning the PFD knob after pressing the ALT key.
Altitude Select Window
Current Altitude
Altitude Bug
Barometric Setting
Figure 1-13 Pressing PFD Knob Sets Altitude Select to Current Altitude