Filter
Top Products
3-45190-01102-02 Rev. B
Garmin G500 Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
3.4.1.3 PFD Options - Wind Vector
When selected, wind vector information is displayed on the PFD to the left of
the HSI. Four styles are available.
1) While viewing the System Setup page of the AUX page group, press the small
MFD knob to activate the cursor. Turn the large MFD knob to highlight the
desired Wind Vector value.
2) Turn the small MFD knob to select the style and press ENT
.
Style 1 Style 2 Style 3 Style 4
Figure 3-68 Wind Vector Style
3) When a Wind Vector style is selected, a Wind Vector box with the chosen style
will be displayed to the left of the HSI on the PFD. When OFF is selected, the
Wind Vector box will not be displayed.