Filter
Top Products
Rosemount Model 8800C Vortex Flowmeter with FOUNDATION
™
Fieldbus
7-4
Diagnostic Messages In addition to the output, the LCD indicator displays diagnostic
messages for troubleshooting the flowmeter. These messages are as
follows:
FAULT_ROM
The flowmeter electronics have undergone an EPROM checksum fault.
Contact your field service center.
FAULT_EEROM
The flowmeter electronics have undergone an EEPROM checksum
fault. Contact your field service center.
FAULT_RAM
The flowmeter electronics have undergone a RAM test fault. Contact
your field service center.
FAULT_ASIC
The flowmeter electronics have undergone a digital signal processing
ASIC update fault. Contact your field service center.
FAULT_COPRO
The flowmeter electronics have detected a fault in the math coprocessor.
Consult your field service center.
FAULT_SFTWR
The flowmeter electronics have detected a nonrecoverable fault in the
software operation. Consult your field service center.