Filter
Top Products
Appendix
D-1
D Operation with
Fisher-Rosemount
®
DeltaV
™
INTRODUCTION Appendix D provides specific instructions for performing basic
configuration operations on the Model 8800C Vortex Flowmeter using
the Fisher-Rosemount DeltaV host software. Appendix D is not a
comprehensive resource, but a starting point. For more information,
refer to the following sources:
• Section 3: Flowmeter Operation for complete information about
the transmitter operation that does not depend upon the host
software.
• Section 4: Transducer Block for complete information about the
transducer block and its parameters.
• Section 5: Resource Block for complete information about the
resource block and its parameters.
• Appendix A: F
OUNDATION fieldbus Technology and Fieldbus
Function Blocks for general information about F
OUNDATION
fieldbus.
• Appendix B: Analog Input (AI) Function Block for complete
information about the AI block and its parameters.
• Appendix C: PID Function Bock for complete information about
the PID block and its parameters.
• DeltaV (or your host software title) On-line Help or
Documentation for complete information about navigating in the
host software that you are using (supplied by the software
manufacturer).
SOFTWARE
FUNCTIONALITY
The Model 8800C Vortex Flowmeter with FOUNDATION fieldbus
software is designed to permit remote testing and configuration using
the Fisher-Rosemount DeltaV Fieldbus configuration tool or another
F
OUNDATION fieldbus host.