Filter
Top Products
Rosemount Model 8800C Vortex Flowmeter with FOUNDATION
™
Fieldbus
2-20
Figure 2-17. Model 8800C Transmitter
Field Wiring.
Remote Electronics If you order one of the remote electronics options (options R10, R20,
R30, or RXX), the flowmeter assembly will be shipped in two parts:
1. The meter body with an adapter installed in the support tube and
an interconnecting coaxial cable attached to it.
2. The electronics housing installed on a mounting bracket.
Mounting Mount the meter body in the process flow line as described earlier in
this section (see “Flowmeter Orientation” on page 2-2). Mount the
bracket and electronics housing in the desired location. The housing
can be repositioned on the bracket to facilitate field wiring and conduit
routing.
Power
Supply
FOUNDATION
Fieldbus
Configuration
Tool
Terminators
Devices 1 through 16
*
6234 ft (1900 m) max
(depending upon cable characteristics)
Integrated
Power
Conditioner
and Filter
(Trunk)
(Spur)
(Spur)
*
Intrinsically safe installations may
allow fewer devices per I.S. barrier.
(The power supply,
filter, first terminator,
and configuration tool
are typically located
in the control room.)
Fieldbus
Segment
3144-3144_01A