Filter
Top Products
4 - FLIGHT PLANS
78
190-00356-00 Rev E
Active Flight Plan Shortcuts
Shortcuts
A number of shortcuts are available to save time
when using the active flight plan page. These shortcuts
speed the process of removing approaches, departures,
and arrivals, and aid in selecting a specific flight plan
leg for navigation guidance.
On the preceding page, options to remove
approaches, departures and arrivals were introduced.
This process may also be completed using the CLR
key, as described below and illustrated at left.
To remove an approach, departure, or arrival
using the CLR key:
1. With the active flight plan page displayed, press
the small right knob to activate the cursor.
2. Turn the large right knob to highlight the
title for the approach, departure or arrival you
wish to delete. Titles will appear in light blue
directly above the procedure’s waypoints.
3. Press CLR to display a confirmation window.
4. With “Yes?” highlighted, press ENT to remove
the selected procedure.
This same process may also be used to remove
individual waypoints from the active flight plan.
To remove a waypoint using the CLR key:
1. With the active flight plan page displayed, press
the small right knob to activate the cursor.
2. Turn the large right knob to highlight the
identifier for the waypoint you wish to delete.
Identifiers will appear in green text.
3. Press CLR to display a confirmation window.
4. With “Yes?” highlighted, press ENT to remove
the selected procedure.
The “Activate Leg?” provides a shortcut that allows
you to specify which leg of the flight plan will cur-
rently be used for navigation guidance, using the
direct-to key.
To activate a specific leg of the active flight plan:
1. Press the small right knob to activate the
cursor and turn the large right knob to high-
light the desired destination waypoint.