Garmin GNC 420AW GPS Receiver User Manual


  Open as PDF
of 220
 
12
TAKEOFF TOUR
190-00356-00 Rev E
Nav Pages
The map page is one of seven, or more, pages avail-
ableundertheNAVgroup*:
•DefaultNAVpage •Mappage
•Terrainpage •NAVCOMpage
•Positionpage •Satellitestatuspage
•Verticalnavigationpage
To select the desired NAV page, turn the small
right knob until the desired page is displayed.
If you are currently viewing a page that is not part
oftheNAVgroup,youcanquicklyreturntotheNAV
group using the CLR key.
To select the NAV group and display the default
NAV page, press and hold CLR.
NAV
7+ available pages*
(see list above)
WPT
10 available pages
(see Section 6)
AUX
4 available pages
(see Section 9)
NRST
8 available pages
(see Section 7)
MAIN PAGE GROUPS
InadditiontotheNAVgroupofpages, additional
groups of pages are available for waypoint information
(WPT),auxiliary(AUX)functionssuchasightplan-
ning or unit settings, and listings for nearest (NRST)
airports or other facilities.
To select the desired page group, turn the large
right knob until a page from the desired group is
displayed.
To select the desired page within the group, turn
the small right knob until the desired page is
displayed.
The bottom right corner of the screen
indicates the page group currently being
displayed (e.g., NAV or NRST), the number
of screens available within that group
(indicated by square icons) and the place-
ment of the current screen within that group
(indicated by a highlighted square icon). To
select a different page within the group, turn
the small right knob.
* Seven, or more, NAV Pages are avail-
able when the 400W-series installation
includes connection to traffic, XM radio,
and/or weather information sources. See the
400W/500W Series Display Interfaces Pilot’s
Guide Addendum, part number
190-00356-31 and the 400W/500W Series
Garmin Optional Displays Pilot’s Guide Ad-
dendum, part number 190-00356-30.
Nav Pages
 previous next