Filter
Top Products
6 - WPT PAGES
128
190-00356-00 Rev E
Airport Departure Page
2. Turn the large right knob to place the cursor
on the departure (DEP) procedure name field.
3. Turn the small right knob to display a window
of available departures for the selected airport.
Continue turning the small right knob to
select the desired departure.
4. Press ENT. The cursor moves to the runway
field.
5. Turn the small right knob to display a window
of available runways. Continue turning the
small right knob to select the desired runway.
(“ALL” may appear in the runway field, indi-
cating the departure procedure applies to all
runways. For airports with parallel runways,
“B” may appear at the end of the runway des-
ignation to indicate the departure procedure
applies to both runways.)
6. Press ENT. The cursor moves to the transitions
(TRANS) field.
7. Turn the small right knob to display a window
of available transitions. Continue turning the
small right knob to select the desired transi-
tion.
8. Press ENT. To remove the flashing cursor, press
the small right knob.
Airport Departure Page Options
The following options are available for the airport
departure page, by pressing the MENU key:
Load into Active FPL?
As described earlier in this section.
Select Next FPL Apt?
As described earlier in this section.
Select Destination Apt?
As described earlier in this section.