Filter
Top Products
9 - AUX PAGES
160
190-00356-00 Rev E
Flight Planning
To transfer flight plans or user waypoints to/from
a second 400W (or 500W) Series unit:
1. While viewing the default Nav page, Flight
Plan Catalog, Active Flight Plan page, User
Waypoint page,
or the User Waypoint page by
pressing MENU, scrolling down to “Crossfill” with
the large right knob and then pressing ENT.
On the Aux Flight Planning page scroll down to
“Crossfill” with the large right knob, and then
press ENT.
2. Turn the large right knob to highlight the
Method field. Turn the small right knob to
select “Auto” or “Manual”. “Auto” automati-
cally transfers any selection of (or any change
to) a direct-to destination or active flight
plan, including VNAV parameters, to a second
400W/500W-Series Garmin unit.
NOTE: Crossfill requires both 400W and/or 500W
series units to have the same Jeppesen NavData
®
database cycle number.
3. The flashing cursor highlights the transfer data
option (TRANSFER) field. Turn the small right
knob to display a window of available data
options:
• Active Flight Plan—transfers the active flight
plan,includingVNAVparameters,to/froma
second 400W-Series (or 500W-Series) Garmin
unit in a dual unit installation. This option is
the default when selecting “Crossfill” from the
default Nav Page. Active Flight Plan informa-
tion is automatically transferred between units
when the “Auto” method is selected above.
• Flight Plan—transfers any stored flight
plan to/from a second 400W-Series (or
500W-Series) unit, by selecting the flight plan
by number. This option is the default when
selecting “Crossfill” from the Flight Plan Cata-
log.
• User Waypoints (all)—transfer all
stored user waypoints to/from a second
400W/500W-series unit.
• User Waypoint—transfer the specified user
waypoint to a second 400W/500W-series
unit.
4. Continue turning the small right knob to
highlight the desired data option. Press ENT
select the highlighted option.
5a. For a stored flight plan (“Flight Plan” data
option), the flight plan number field is high-
lighted. Turn the small right knob to select
the desired flight plan and press ENT.
OR
5b. For a specified user waypoint (“User Waypoint”
data option), the waypoint identifier field is
highlighted. Use the small and large right