Filter
Top Products
9 - AUX PAGES
165
190-00356-00 Rev E
Utility Page
To insert a checklist step into an existing check-
list:
1. With the checklists page displayed, turn the
large right knob to select the desired checklist
and press ENT.
2. Turn the large right knob to highlight the
existing checklist entry which will immediately
follow the new checklist step.
3. Turn the small and large right knobs to
enter the new checklist step. Press ENT when
finished.
To delete a checklist or all checklists:
1. With the checklists page displayed, press
MENU to display an options menu.
2. Turn the large right knob to select “delete
checklist” or “delete all checklists” and press
ENT to remove the checklist or all checklists
from memory.
To copy a checklist:
1. With the checklists page displayed and the
desired checklist selected, press MENU.
2. Turn the large right knob to select “Copy
Checklist?” and press ENT to copy the check-
list to an empty checklist memory location.
To sort the checklists by name or entry:
1. With the checklists page displayed, press
MENU to display an options menu.
2. Turn the large right knob to select “Sort List
By Entry?” or “Sort List By Name?” and press
ENT.
Flight Timers
To view, use or reset the generic timer:
1. Select “Flight Timers” from the utility page.
2. The flashing cursor highlights “Start?”. To start
the generic timer, press ENT. (You will typically
begin with this step for count up timers. How-
ever, for count down timers, you may wish to
enter a count direction and time before starting
the timer. )
3. To change the count direction, turn the large
right knob to highlight count direction field:
“Down” or “Up”. Turn the small right knob
to select the desired count direction. Press ENT
when finished.
4. For a count down timer, turn the large right
knob to highlight the time field. Use the small
and large right knobs to enter the count
down time—in hours, minutes and seconds.
Press ENT when finished.
5. To stop the generic timer, turn the large right
knob to highlight “Stop?” and press ENT.
6. To reset the generic timer, turn the large right
knob to highlight the time field. Press CLR,
followed by ENT.