Garmin GNC 420AW GPS Receiver User Manual


  Open as PDF
of 220
 
6 - WPT PAGES
130
190-00356-00 Rev E
VORs
VOR Page
The VOR page displays the facility name, city,
region/country, magnetic variation, latitude and longi-
tudefortheselectedVOR.TheVOR page also displays
the frequency and a weather broadcast indication (if
applicable).TherearenoVORpageoptions.
Magnetic
Variation
VOR Identifier
and Symbol
Ninth Page
in WPT group
Latitude/Longitude
Position
Frequency
and Weather
Broadcast
Indication
Facility Name,
City, and Region/
Country
The following descriptions and abbre-
viations are used:
•Symbol— SeeSection2NavPages-MapPage
for a graphic illustration of available
VORsymbols
•VAR— Magneticvariationindegrees
•Position— Latitude/Longitude(degrees/minutes
or degrees/minutes/seconds), MGRS
or UTM/UPS
•FREQ— Frequencyinmegahertz(MHz)
•WxBrdcst— Weather information is broadcast
on the selected facility’s frequency
AsmentionedinthebeginningofSection6,VORs
may be selected by identifier, facility name or location
(city). The VOR page may also be used to quickly tune
theVLOCreceivertotheselectedVOR’sfrequency.
To select a VOR frequency from the VOR page:
1. Select the VOR page from the WPT page
group.
2. Press the small right knob momentarily to
place the cursor on the VOR identifier field. If
you wish to select another VOR, use the small
and large right knobs and press ENT when
finished.
3. Turn the large right knob to highlight the
frequency field and press ENT to place the
frequency in the standby field of the VLOC
window.
4. To activate the standby VLOC frequency, press
the VLOC flip-flop key.
 previous next