Filter
Top Products
2 - NAV PAGES
32
190-00356-00 Rev E
Restoring Factory Settings
You can also quickly return all data field settings to
their original factory settings.
To restore all six data fields to factory default
settings:
1. Starting with the default NAV page, press the
MENU key to display an options menu.
2. Turn the large right knob to highlight the
“Restore Defaults?” option and press ENT.
Dual Unit Considerations
A“Crossll?”optionisprovidedfromtheDefault
NAVPage.Thisoptionallowsyoutotransferadirect-
todestination,theactiveightplanincludingVNAV
parameters, any stored flight plan or user waypoints to
a second 400W or 500W-series Garmin unit.
See Section 9 - Aux Pages - Flight Planning -
Crossfill Operation for additional details on using the
“Crossfill?” option.
NOTE: The databases of the 400/500 series and
the 400W/500W are incompatible so you may not
mix systems.
Map Page
ThesecondNAVpageisthemappage,whichdis-
plays your present position using an airplane symbol,
along with nearby airports, navaids, user-defined
waypoints, airspace boundaries, lakes, rivers, high-
ways and cities.
NOTE: The electronic chart is an aid to navigation
and is designed to facilitate the use of authorized
government charts, not replace them. Land and
water data is provided only as a general reference
to your surroundings. The positional accuracy
of the land and water data is not of a precision
suitable for use in navigation and it should not
be used for navigation. Only official government
charts and notices contain all information needed
for safe navigation – and, as always, the user is
responsible for their prudent use.
Data
Fields
Present
Position
Map Display
Map Range
Page location
in NAV group
NOTE: If the 400W-series unit is unable to
determine a GPS position, the present position
(airplane) symbol will appear on the Map Page in
yellow. No symbol will be present when there is
no active flight plan.
Map Page