Garmin GNC 420AW GPS Receiver User Manual


 
INTRODUCTION
iii
190-00356-00 Rev E
Accessories and Packing List
Congratulations on choosing the world’s finest
panel-mounted IFR navigation/communication system!
The 400W-series represents Garmin’s continued com-
mitment to providing you with the most advanced
technology available today — in an accurate, easy-to-
use design suitable for all of your flying needs.
Unless otherwise specified within this manual,
the term "
400W-series
" applies to the GPS 400W,
GNC 420W, GNC 420AW, GNS 430W, and GNS
430AW models. Please note that the difference
between these models is indicated in the Specifi-
cations section of this manual (see Appendix B).
Before installing and getting started with your new
system, please ensure that your package includes the
following items. If any parts are missing or are dam-
aged, please contact your Garmin dealer.
Standard Package:
• Garmin400W-seriesUnit
• NavData
®
Card
• TerrainCard
• GPSAntenna
• InstallationRack&Connectors
• Pilot’sGuide
• QuickReference
• 400W/500WSeriesDisplayInterfaces
Addendum
• 400W/500WSeriesGarminOptionalDisplay
Interfaces Addendum
• GNS400W/500W-series Simulator Training
 CD-ROM
• Database Subscription Packet
• WarrantyRegistrationCard
Upgrade Package:
• Garmin400W-seriesUnit
• NavData
®
Card
• TerrainCard(optional)
• GPSAntenna
• Pilot’sGuide&Reference
• QuickReference
• 400W/500WSeriesDisplayInterfaces
Addendum
• 400W/500WSeriesGarminOptionalDisplay
Interfaces Addendum
• GNS400W/500W-series Simulator Training
 CD-ROM
• DatabaseSubscriptionPacket
• WarrantyRegistrationCard
Your Garmin dealer will perform the installation
and configuration of your new 400W-series unit. After
installation,theNavData
®
card will already be installed
into the correct slot on the front of the unit (see
Appendix A). The 400W-series will be secured in the
installation rack with the proper wiring connections.
Have your dealer answer any questions you may have
about the installation — such as location of antennas
or any connections to other equipment in the panel.
Accessories and Packing List