Garmin GNC 420AW GPS Receiver User Manual


 
6 - WPT PAGES
117
190-00356-00 Rev E
WPT Page Group
Section 6
WPT Pages
WPT Page Group
The Waypoint (WPT) page group provides infor-
mationaboutthethousandsofairports,VORs,NDBs,
intersections, runways, frequencies, and procedures
storedonyourJeppesenNavData
®
card. A WPT page
is also provided to display information for up to 1,000
user-created waypoints.
To quickly select a WPT page:
1. From any page, press and hold CLR to select
the default NAV page. (You may skip this step
if you are already viewing any of the main
pages.)
2. Turn the large right knob to select the WPT
page group. “WPT” will appear in the lower
right corner of the screen.
3. Turn the small right knob to select the desired
WPT page.
NOTE: Please note that your 400W-series uses ICAO identifiers for all airports. All U.S. airport identifiers which
contain only letters use the prefix “K”. For example, Los Angeles International is KLAX under the ICAO standard.
Other airports, such as Otten Memorial (3VS), that contain numbers in the identifier, do not require the “K” prefix.
Many foreign countries use two letter prefixes.
Airport Location
Airport Runway
Airport Frequency
Airport Approach Airport Arrival Airport Departure
Intersection
NDB
VOR
User Waypoint
NAV
7+ available pages
(see Section 2)
WPT
10 available pages
(see list below)
AUX
4 available pages
(see Section 9)
NRST
8 available pages
(see Section 7)