Garmin GNC 420AW GPS Receiver User Manual


 
2 - NAV PAGES
29
190-00356-00 Rev E
Section 2
NAV Pages
Main Page Groups
The
400W-series
main pages are divided into
groups:NAV,WPT,AUXandNRST.Whileview-
ing any of these pages, selection of another page is a
simple selection process using the small and large
right knobs.
NAV
7+ available pages
(see list below)
WPT
10 available pages
(see Section 6)
AUX
4 available pages
(see Section 9)
NRST
8 available pages
(see Section 7)
To select the desired page group, turn the large
right knob until a page from the desired group is
displayed.
To select the desired page within the group, turn
the small right knob until the desired page is
displayed.
NAV Page Group
TheNAVpagegroupincludesseven,ormore,
pages.WhileviewinganyNAVpage,turnthesmall
right knobtoselectadifferentNAVpage.Youmay
find this selection process convenient to cycle between
the default NAV and map pages—two of the most
frequently used pages. Other pages are provided to
list frequencies for your flight plan, show your current
position, display current satellite reception, and make
vertical navigation settings.
Default NAV
Map
Terrain
VNAV
Position
Satellite Status
NAVCOM
The bottom right corner of the screen indicates which page
group is currently being displayed (e.g., NAV or NRST), the
number of screens available within that group (indicated by
square icons) and the placement of the current screen within
that group (indicated by a highlighted square icon). To select a
different page within the group, turn the small right knob.
This part of the screen is also used to display the 400W-series
turn advisories (e.g., “DTK 313° 9 S”, or LT TO 030° NOW) and
waypoint alerts (e.g., “ARRIVING WPT” or “HOLD TEARDROP”)
during flight plan and approach operations. Seconds will be
abbreviated as “S” and Now may be seen as “N”. See Section
5 for more information.
Page Groups / NAV Page Group