Filter
Top Products
4 - FLIGHT PLANS
74
190-00356-00 Rev E
Active Flight Plan Options
2. A window will appear listing the available
approaches for your destination airport. Turn
the small right knob to highlight the desired
approach and press ENT.
3. A second window will appear listing available
transitions for the approach. Turn the small
right knob to highlight the desired transi-
tion waypoint and press ENT. (The “Vectors”
option assumes you will receive vectors to the
final course segment of the approach and will
provide navigation guidance to intercept this
final course.)
4. Turn the large right knob to highlight “Load?”
or “Activate?” and press ENT. “Load?” will
add the approach to the flight plan without
immediately using the approach for navigation
guidance. This allows you to continue navigat-
ing the original flight plan until cleared for the
approach—but, keeps the approach available
for quick activation when needed.
5. For approaches not approved for GPS, a
reminder window will appear indicating that
GPS guidance on such approaches is strictly
for monitoring only. To confirm this reminder,
highlight “Yes?” and press ENT.
Select Arrival
Select Arrival? allows you to select a published
standard terminal arrival route (STAR) for the destina-
tion airport, or replace the current arrival with a new
selection.
To select an arrival for a direct-to or flight plan
destination airport:
1. Select the “Select Arrival?” option from the
active flight plan page options and press
ENT.
2. A window will appear listing the available
transitions for your destination airport. Turn
the small right knob to highlight the desired
transition waypoint and press ENT.