Filter
Top Products
6 - WPT PAGES
127
190-00356-00 Rev E
Airport Arrivals
4. Press ENT. The cursor moves to the transitions
(TRANS) field.
5. Turn the small right knob to display a window
of available transitions. Continue turning the
small right knob to select the desired transi-
tion.
6. Press ENT. The cursor moves to the runway
field.
7. Turn the small right knob to display a window
of available runways. Continue turning the
small right knob to select the desired runway.
(“ALL” may appear in the runway field, indicat-
ing the arrival procedure applies to all runways.
For airports with parallel runways, “B” may
appear at the end of the runway designation
to indicate the arrival procedure applies to both
runways.)
8. Press ENT. To remove the flashing cursor, press
the small right knob.
Airport Arrival Page Options
The following options are available for the airport
arrival page, by pressing the MENU key:
Load into Active FPL?
As described earlier in this section.
Select Next FPL Apt?
As described earlier in this section.
Select Destination Apt?
As described earlier in this section.
Airport Departure Page
The airport departure page shows the available Air-
portStandardInstrumentDeparture(SID) procedures
for the selected airport. Where multiple runways or
transitions are associated with the departure proce-
dure, that information may also be displayed. A map
image provides a layout diagram for each departure,
runway and transition.
Departure Procedure
Name
Airport Identifier,
Symbol and Type
Map Image
Sixth Page
in WPT group
Runways
Associated
with
Departure
Transitions
To scroll through the available departures:
1. Press the small right knob to activate the
cursor.