Garmin GNC 420AW GPS Receiver User Manual


  Open as PDF
of 220
 
4 - FLIGHT PLANS
72
190-00356-00 Rev E
Flight Plan Catalog Options
Active Flight Plan Page
The active flight plan page provides information
and editing functions for “flight plan 00”— the flight
plan currently in use for navigation. Once you have
activated a flight plan, the active flight plan page will
show each waypoint for the flight plan, along with the
desiredtrack(DTK)anddistance(DIS)foreachleg.
The data fieldsforDTKandDISareuser-selectable
and may be changed to display cumulative distance
(CUM) to each waypoint, estimated time of arrival
(ETA), estimated time en route (ETE) or en route safe
altitude (ESA).
To change a data field on the active flight plan
page:
1. With the active flight plan page displayed, press
MENU to display the active flight plan page
options window.
2. Turn the large right knob to highlight
“Change Fields?” and press ENT.
3. Turn the large right knob to highlight the field
you wish to change.
4. Turn the small right knob to select the desired
data item and press ENT.
5. Press the small right knob to remove the
cursor.
To restore factory default settings for data fields
on the active flight plan page:
1. With the active flight plan page displayed, press
MENU to display the active flight plan page
options window.
2. Turn the large right knob to highlight
“Restore Defaults?” and press ENT.
Active Flight Plan Options
The following options (some covered on the pre-
ceding pages) are available for the active flight plan:
• ActivateLeg
• Crossll
• CopyFlightPlan
• InvertFlightPlan
• DeleteFlightPlan
• SelectApproach
• SelectArrival
• SelectDeparture
• RemoveApproach
• RemoveArrival
• RemoveDeparture
• ClosestPointofFlightPlan
• ParallelTrack
• ChangeFields
• RestoreDefaults
Activate Leg
Activate Leg? activates/reactivates the flight plan
and selects the highlighted leg as the “active leg” (the
leg which will currently be used for navigation guid-
ance).
To activate a flight plan along a specific leg:
1. Press the small right knob to activate the
cursor and turn the large right knob to highlight
 previous next