Filter
Top Products
6 - WPT PAGES
135
190-00356-00 Rev E
User Waypoint Page Options
3. The top of the user waypoint list will indicate
the total number of user waypoints currently
used and available memory. If more user
waypoints are stored than can be displayed
on a single screen, turn the large right knob
to scroll through the user waypoint list.
4. Press the small right knob to return to the
user waypoint page.
Delete User Waypoint?
allows you to delete the
selected waypoint from memory.
To delete a user waypoint:
1. Select the desired waypoint on the user way-
point page and press MENU to display the
user waypoint page options.
2. Turn the large right knob to highlight “Delete
User Waypoint?” and press ENT.
Crossfill? allows you to transfer a user waypoint
to another 400W/500W series unit (if installed).
User Waypoint List
The user waypoint list allows you to review,
modify, rename or delete a selected user waypoint,
or to delete all user waypoints currently stored in
memory. The top of the page shows the number of
waypoints used and available memory.
To review and/or modify a user waypoint from the
user waypoint list:
1. Select the user waypoint list, as described in
the User Waypoint Options.
2. Turn the large right knob to highlight the
desired user waypoint.
3. Press ENT to display the user waypoint page for
the selected waypoint. From this page you may
review all information defining the waypoint
and its position.
4. To modify the waypoint’s position or refer-
ence waypoint information, follow the steps
described “Modifying User Waypoints.” (Keep
in mind that you’ve already selected a user
waypoint page which displays the desired user
waypoint, so you may skip the first two steps
of the procedure.)
5. To exit the user waypoint page, turn the large
right knob to highlight “Done?” and press
ENT.