Filter
Top Products
6 - WPT PAGES
122
190-00356-00 Rev E
Airport Frequencies
The following descriptions and abbreviations are
used on the airport runway page:
Frequency
Airport Identifier,
Symbol and Type
Frequency Type
Third Page
in WPT group
Scroll Bar
Usage Restrictions
Information
•Type— Usagetype:Public,Military,Heli-
port, or Private
•Surface— Runwaysurfacetypesinclude:Hard,
Turf,Sealed,Gravel,Dirt,Soft,
Unknown or Water
•Lighting— Runwaylightingtypesinclude:
No Lights, Part Time, Full Time,
Unknown or Frequency (for pilot-
controlled lighting)
Airport Runway Page Options
Select Next FPL Apt?
As described earlier in this section.
Select Destination Apt?
As described earlier in this section.
Airport Frequency Page
The airport frequency page displays radio frequen-
cies and frequency types for the selected airport, as
well as sector and altitude restrictions (where appli-
cable). If the selected airport has a localizer-based
approach, the localizer frequency(s) is also listed on
the airport frequency page. The airport frequency page
may be used to quickly select and tune a COM or
VLOCfrequency.
To scroll through the frequency list and tune to a
desired frequency on the list:
1. Press the small right knob to activate the
cursor.
2. Turn the large right knob to scroll through the
list, placing the cursor on the desired frequency.
If there are more frequencies in the list than can
be displayed on the screen, a scroll bar along
the right-hand side of the screen will indicate
where you are within the list.
3. Press ENT to place the selected frequency
in the standby field of the COM or VLOC
window.