Filter
Top Products
Summer time is off by default. Touch [Sum-
mer Time] to change the time if you are in the
summer time period. This turns the display
below summer time [On].
5 Touch [Time format].
Each time you touch the key changes that set-
ting.
! [12H] (default):
Switching the display for 12 hours with am/
pm.
! [24H]:
Switching the display for 24 hours.
Changing the unit between km and miles
This setting controls the unit of distance and
speed displayed on your navigation system.
1 Display the “Regional Settings” screen.
2 Touch [km / mile].
A message confirming whether to change the
setting appears.
3 Touch [Yes].
It changes the settings as follows:
! [mile] (default):
Show distance in miles.
! [Mile&Yard]:
Show distance in miles and yards.
! [km]:
Show distance in kilometers.
# Touch [No].
Cancels the setting.
Changing the virtual speed of the vehicle
When calculating the expected time of arrival
and the number of hours to the destination,
set the average speed for the freeway or ordin-
ary roads using [+] and [–].
1 Display the “Regional Settings” screen.
2 Touch [Speed].
The “Average Speed Settings” screen ap-
pears.
3 Touch [+] or [–] to set the speed.
p The estimated time of arrival is not necessa-
rily estimated based on this speed value.
4 Touch [OK].
The settings are completed.
Setting the Volume for
Guidance and Phone
The sound volume for the navigation can be
set. You can separately set the volume of the
route guidance and the beep sound.
1 Display the “System Settings” screen.
2 Touch [Volume].
The “Volume Settings” screen appears.
3 Touch the key next to “Beep”.
Each time you touch the key changes that set-
ting.
! [On] (default):
A beep sounds.
! [Off]:
Muting the beep sound.
4 Touch [+] or [–] to set their volume.
On this screen, you can operate the following
items.
! [Guidance]
Customizing preferences
En
98
Chapter
13