Filter
Top Products
You can listen to the radio by using the naviga-
tion system. This section describes operations
for HD Radio reception.
p For details concerning operation, refer to
the HD Radio tuner’s operation manual.
% Touch [Digital Radio] on the “AV
Source” menu to display the “Digital
Radio” screen.
= For details concerning operations, refer to
Screen switching overview on page 34.
Reading the screen
1
8
9
a
4
b
7
32 65
1 Source icon
Shows which source has been selected.
2 Band indicator
Shows which band the radio is tuned to: FM1,
FM2, FM3 or AM.
3 Preset number indicator
Shows what preset item has been selected.
4 Multicasting indicator
Shows the number of multicast channels in
the current frequency.
5 Frequency indicator
6 Current time
7 Detailed information
= For details, refer to Switching the display
on the next page.
8 Signal level indicator
9 Blending mode indicator
= For details, refer to Switching the recep-
tion mode on page 110.
a Signal type indicator
Shows the type of signal currently being re-
ceived. If a digital broadcasting is received,
“D” appears. Otherwise, “A” appears.
b Seek type indicator
= For details, refer to Switching the seek
mode on page 110.
Using the touch panel keys
1
2
3
4
1 Display the “Function” menu
= For details, refer to Using the
“Function” menu on the next page.
2 Select a preset channel
[c]or[d] can be used to switchpresets chan-
nels.
3 Perform manual tuning
Totune manually, touch [c]or[d] briefly. The
frequencies move up or down one step at a
time.
Perform seek tuning
Toperform seek tuning, touch and hold [c]or
[d] for about one second and release. The
tuner will scan the frequencies until a broad-
cast strong enough for good reception is
found.
p You can cancel seek tuning by touching
either [c]or[d] briefly.
p If you touch and hold [c]or[d], you
can skip broadcasting frequencies.
Seek tuning will start as soon as you re-
lease the keys.
p You can also perform these operations
by using the TRK (c/d) button.
4 Select a band
Touch[Band] repeatedly until the desired
band is displayed: FM1, FM2, FM3 or AM.
p This function is convenient for preparing
different preset lists for each band.
HD RadioäReception
En
108
Chapter
16