Filter
Top Products
p You cannot make adjustments in the follow-
ing situations:
— AV source is [Off]
— During muting/attenuation
p You cannot select [SLA] when the FM tuner
is selected as the AV source.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Touch [FAD/BAL] on the “AV Sound Set-
tings” menu.
= For details, refer to Displaying the “AV
Sound Settings” menu on the previous
page.
When [Sub. W] is selected in [Rear SP],
[Balance] will be displayed instead of
[FAD/BAL] and front/rear speaker balance
cannot be adjusted.
= Refer to Setting the rear output on page 161.
2 Touch [a]or[b] to adjust front/rear
speaker balance.
Each time you touch [a]or[b], the front/rear
speaker balance moves towards the front or
the rear.
“Front:15” to “Rear:15” is displayed as the
front/rear speaker balance moves from front to
rear.
Setting “Front:” and “Rear:” to “0” is correct
when using a two speaker system.
3 Touch [c]or[d] to adjust left/right
speaker balance.
Each time you touch [c]or[d], the left/right
speaker balance moves towards the left or the
right.
Left:15 to Right:15 is displayed as the left/
right speaker balance moves from left to right.
Using the equalizer
The equalizer lets you adjust equalization to
match vehicle interior acoustic characteristics
as desired.
Recalling equalizer curves
There are seven stored equalizer curves that
you can easily recall at any time. Here is a list
of the equalizer curves:
Equalizer curve
Super Bass
Super Bassis a curve in whichonly low-pitched
sound is boosted.
Powerful
Powerful is acurve inwhich low-pitched andhigh-
pitched sounds areboosted.
Natural
Natural is acurve inwhich low-pitched andhigh-
pitched sounds areslightly boosted.
Vocal
Vocal isa curve in which themidrange, which isthe
human vocal range,is boosted.
Flat
Flat is aflat curve in whichnothing is boosted.
Custom1
Custom1 is anadjusted equalizer curve thatyou cre-
ate. Aseparate customcurve canbe created for each
source.
Custom2
Custom2 is anadjusted equalizer curve thatyou cre-
ate. If youselect this curve, theeffect is reflected all
AV source.
Customizing preferences
En
164
Chapter
32