Filter
Top Products
! Donot operate this navigation system until
the LCD panel completely opens or closes. If
this navigation system is operated while the
LCD panel is opening or closing, the LCD
panel may stop at that angle for safety.
! Donot place a glass or a can on this naviga-
tion system when the LCD panel is open.
Doing so may break this navigation system.
Inserting a disc
1 Press the OPEN CLOSE button.
The “Monitor Setup” screen appears.
2 Touch [Open].
The LCD panel opens, and the disc loading
slot appears.
3 Insert a disc into the disc loading slot.
p Do not insert anything other than a disc
into the disc loading slot.
4 Press the OPEN CLOSE button.
The LCD panel closes.
Ejecting a disc
1 Press the OPEN CLOSE button.
The “Monitor Setup” screen appears.
2 Touch [Disc Eject].
The LCD panel opens, and the disc is ejected.
3 Press the OPEN CLOSE button.
The LCD panel closes.
Inserting and ejecting an
SD memory card
CAUTION
! To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
! Ifdata loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
! Donot press the OPEN CLOSE button when
the SD memory card is not fully inserted.
Doing so may damage the card.
! Donot press the OPEN CLOSE button before
the SD memory card has been completely re-
moved. Doing so may damage the card.
Press the middle of the SD memory card
gently and pull out straight.
p This system is not compatible with Multi
Media Card (MMC).
p Compatibility with all SD memory cards is
not guaranteed.
p This unit may not achieve optimum perfor-
mance with some SD memory cards.
Inserting an SD memory card
1 Press the OPEN CLOSE button.
The “Monitor Setup” screen appears.
Basic operation
En
29
Chapter
02
Basic operation