You can display “video image” output by AV1
Input or AV2 Input to the screen of the navi-
gation system. For details of the connection
method, refer to “Installation Manual”.
CAUTION
For safety reasons, video images cannot be
viewed while your vehicle is in motion. To view
video images, you must stop in a safe place and
apply the parking brake.
Using AV1
You can display “video image” output by the
equipment connected to “AV1 Input”.
1 Touch [AV1 Input] on the “AV System
Settings” menu.
= For details, refer to Setting video input 1
(AV1) on page 160.
2 Touch [AV1] on the “AV Source” menu.
The image is displayed on the screen.
= For details concerning operations, refer to
Screen switching overview on page 34.
Using AV2
You can display “video image” output by the
equipment connected to “AV2 Input”.
1 Touch [AV2 Input] on the “AV System
Settings” menu.
= For details, refer to Setting video input 2
(AV2) on page 160.
2 Touch [AV2] on the “AV Source” menu.
The image is displayed on the screen.
= For details concerning operations, refer to
Screen switching overview on page 34.
Using the touch panel keys
% Touch the screen to display the touch
panel keys.
1
1 Hide the touch panel keys
Touching[Hide] hides the touch panel
keys. Touchanywhere on the LCD screen to
display the touch panel keys again.
Using AV input
En
156
Chapter
29